8
CONTROLS AND FUNCTIONS
■
When selecting a preset station
number
1
Set code number “0023” in the AMP/TUN (or
DSP/TUN) position.
See page 51 for setting the code.
2
Set the selector dial to the AMP/TUN (or
DSP/TUN) position.
3
You can select a preset station number
directly with the numeric buttons (1 to 8).
See page 34.
STANDBY
/ON
–
+
–
+
30
°
30
°
SURROUND
D I G I T A L
D I G I T A L
The remote control transmits a directional infrared beam.
Be sure to aim the remote control directly at the remote
control sensor on the main unit during operation.
■
Handling the remote control
• Do not spill water or other liquids on the remote
control.
• Do not drop the remote control.
• Do not leave or store the remote control in the
following types of conditions:
– high humidity or temperature such as near a heater,
stove or bath;
– dusty places; or
– in places subject to extremely low temperatures.
Approximately 6 m (20 feet)
Using the Remote Control
