Yamaha RX-A3020 Owner'S Manual Download Page 163

Page: 163 / 171

APPENDIX

➤

Specifications

163

• RIAA Equalization Deviation

PHONO (20 Hz to 20 kHz)..........................................0±0.5 dB

• Total Harmonic Distortion

PHONO to AV OUT ..............................................0.02% or less

MULTI CH INPUT to Speaker Out (Pure Direct, 70 W, 8

)

.............................................................................0.04% or less

• Signal to Noise Ratio (IHF-A Network)

PHONO to AV OUT (Input Shorted 5 mV)

[U.S.A., Canada, China and General models] ...86 dB or more

[Other models]....................................................81 dB or more

AUDIO 2 etc. to Speaker Out (Pure Direct, Input Shorted 250 mV)

..........................................................................100 dB or more

• Residual Noise (IHF-A Network)

Front L/R (Speaker Out)......................................150 µV or less

• Channel Separation

PHONO (Input Shorted, 1 kHz/10 kHz) ... 60 dB/55 dB or more

AUDIO 2 etc. (Input 5.1 k

Shorted, 1 kHz/10 kHz)

................................................................. 60 dB/45 dB or more

• Volume Control

Main Zone.................MUTE, -80 dB to +16.5 dB (0.5 dB Step)

Zone2/Zone3 ............MUTE, -80 dB to +16.5 dB (0.5 dB Step)

• Tone Control Characteristics

Main Zone

Bass Boost/Cut .........................±6.0 dB/50 Hz (0.5 dB Step)

Bass Turnover............................................................. 350 Hz

Treble Boost/Cut ..................... ±6.0 dB/20 kHz (0.5 dB Step)

Treble Turnover .......................................................... 3.5 kHz

Zone2/Zone3

Bass Boost/Cut .............................±10 dB/50 Hz (2 dB Step)

Bass Turnover............................................................. 350 Hz

Treble Boost/Cut ...........................±10 dB/50 Hz (2 dB Step)

Treble Turnover .......................................................... 3.5 kHz

• Filter Characteristics

(fc=40/60/80/90/100/110/120/160/200 Hz)

H.P.F. (Front, Center, Surround, Surround Back: Small)

.................................................................................. 12 dB/oct.

L.P.F. (Subwoofer)..................................................... 24 dB/oct.

Video Section

• Video Signal Type

[U.S.A., Canada, Korea and General models]................ NTSC

[Other models] ................................................................... PAL

• Video Signal Type (Video Conversion) ..................... NTSC/PAL

• Video Signal Level

Composite ..............................................................1 Vp-p/75

S-video

Y ..........................................................................1 Vp-p/75

C (NTSC) [U.S.A., Canada, Korea and General models]

.....................................................................0.286 Vp-p/75

C (PAL) [Other models] ....................................0.3 Vp-p/75

Component

Y ..........................................................................1 Vp-p/75

Pb/Pr.................................................................0.7 Vp-p/75

• Video Maximum Input Level (Video Conversion Off)

.......................................................................1.5 Vp-p or more

• Signal to Noise Ratio (Video Conversion Off)..... 60 dB or more

• Monitor Out Frequency Response (Video Conversion Off)

Component (MONITOR OUT/ZONE OUT)

........................................................... 5 Hz to 100 MHz, ±3 dB

FM Section

• Tuning Range

[U.S.A. and Canada models] .............. 87.5 MHz to 107.9 MHz

[Asia and General models]

...................................... 87.5/87.50 MHz to 108.0/108.00 MHz

[Other models] ................................ 87.50 MHz to 108.00 MHz

• 50 dB Quiet Sensitivity (IHF, 1 kHz, 100% MOD.)

Mono .................................................................3 µV (20.8 dBf)

• Signal to Noise Ratio (IHF)

Mono/Stereo [except U.S.A. model] .....................72 dB/70 dB

HD [U.S.A. model]........................................................... 80 dB

• Harmonic Distortion (IHF, 1 kHz)

Mono/Stereo [except U.S.A. model] ....................... 0.3%/0.5%

HD [U.S.A. model]...........................................................0.03%

• Antenna Input ................................................ 75

unbalanced

AM section

• Tuning Range

[U.S.A. and Canada models]...................530 kHz to 1710 kHz

[Asia and General models] ......530/531 kHz to 1710/1611 kHz

[Other models] .........................................531 kHz to 1611 kHz

General

• Power Supply

[U.S.A. and Canada models].......................... AC 120 V, 60 Hz

[General model] ............ AC 110 to 120/220 to 240 V, 50/60 Hz

[China model] ................................................. AC 220 V, 50 Hz

[Korea model] ................................................. AC 220 V, 60 Hz

[Australia model]............................................. AC 240 V, 50 Hz

[U.K. and Europe models] .............................. AC 230 V, 50 Hz

[Asia model].................................... AC 220 to 240 V, 50/60 Hz

• Power Consumption

[U.S.A. model].....................................................490 W/620 VA

[Canada model] ..................................................400 W/510 VA

[Korea model] ................................................................. 390 W

[Other models] ................................................................ 490 W

• Standby Power Consumption

HDMI Control Off, Standby Through Off ........... 0.3 W (Typical)

HDMI Control On, Standby Through On ........... 5.0 W (Typical)

HDMI Control Off, Standby Through On (AV 1, No Signals)

.......................................................................... 4.2 W (Typical)

Network Standby On......................................... 2.2 W (Typical)

• Maximum Power Consumption

[Asia and General models] ........................................... 1210 W

• Dimensions (W x H x D)

......................435 x 192 x 467 mm (17-1/8” x 7-1/2” x 18-3/8”)

• Weight

[RX-A3020]

[China, U.K. and Europe models] .............. 19.9 kg (43.9 lbs)

[Other models] ........................................... 18.2 kg (40.1 lbs)

[RX-A2020].................................................... 17.1 kg (37.7 lbs)

* Specifications are subject to change without notice.

Summary of Contents for RX-A3020












































































































































































Search results

Summary of Contents for RX-A3020

Reviews:

Related manuals for RX-A3020

Brands by name

Popular brands

Yamaha RX-A3020, Owner'S Manual

Search results

Summary of Contents for RX-A3020

Reviews:

Related manuals for RX-A3020

Brands by name

Popular brands