En
131
Speaker (Manual Setup)
Configures the speaker settings manually.
X
Default settings are underlined.
⬛
Setting Pattern
Registers two speaker setting patterns and switches between them.
When you configure the following speaker settings, the settings will be memorized in the
selected pattern.
• Measurement results (Auto Setup)
• Power Amp Assign
• Configuration
• Distance
• Level
• Parametric EQ
Settings
Pattern1, Pattern2
X
• The setting pattern currently selected is shown at the top of the “Manual Setup” screen.
• This function is useful when you want to save certain settings according to the varying conditions of your
listening environment. For example, if you want to switch the settings when curtains are open or closed, you
can save the settings suited for each condition and switch between them.
⬛
Setting Data Copy
Copies the “Setting Pattern” parameters in the specified direction.
Choices
⬛
Power Amp Assign
Selects a speaker system.
The unit has 9 built-in amplifiers. You can connect 2 to 11 speakers and up to 2 subwoofers
(with built-in amplifier) to create the favorite acoustic space in your room. You can also apply
bi-amp connections, channel expansion (using an external power amplifier) or multi-zone
configurations to enhance your system.
Settings
Pattern1 > 2
Copies the “Pattern1” parameters to “Pattern2”.
Pattern2 > 1
Copies the “Pattern2” parameters to “Pattern1”.
Basic
Select this option when you use the basic speaker configuration (up to 9-channel
plus rear presence speakers) (p.21).
7.2 +1Zone
Select this option when you use Zone2 (or Zone3) speakers in addition to the 7.2
system in the main zone (p.32).
You can select a zone to be assigned to the EXTRA SP 1 jacks (default: Zone2).
7.2.2 +1Zone
Select this option when you use Zone2 (or Zone3) speakers in addition to the
7.2.2 system in the main zone (p.32).
You can select a zone to be assigned to the EXTRA SP 2 jacks (default: Zone2).
7.2 +2Zone
Select this option when you use Zone2 and Zone3 speakers in addition to the 7.2
system in the main zone (p.32).
You can select a zone to be assigned to the EXTRA SP 1 and EXTRA SP 2 jacks
(default: Zone2 for EXTRA SP 1, Zone3 for EXTRA SP 2).
7.2.4 [ext.RP]
(RX-A3060 only)
Select this option when you use the 7.2.4 system including rear presence channel
expansion using an external amplifier (p.33).
7.2.4 [ext.FRONT]
(RX-A3060 only)
Select this option when you use the 7.2.4 system including front channel
expansion using an external amplifier (p.34).
7.2.4 [ext.FP+RP]
(RX-A3060 only)
Select this option when you use the 7.2.4 system including front presence and
rear presence channel expansion using an external amplifier (p.34).
7.2.2 [ext.FRONT]
+1Zone
Select this option when you use Zone2 (or Zone3) speakers in addition to the
7.2.2 system (including front channel expansion using an external amplifier) in
the main zone (p.35).
You can select a zone to be assigned to the EXTRA SP 2 jacks (default: Zone2).
Summary of Contents for RX-A2060
