Yamaha RX-A2000, Owner'S Manual

Page: 112 / 195

SETUP
Setting various functions (Setup menu)
En
112
Power Amp Assign
In addition to the 7.1-channel speaker connection, various speaker
configurations are possible using the presence speakers connection,
bi-amp connection or multi-zone function (
☞
p. 20 , p. 21 ).
Configuration
Displays the speakers connected to this unit or changes the sizes of
the speakers.
Front
Selects the size (sound reproduction capacity) of the front
speakers.
J
1
Center
Selects the size of the center speaker.
7ch Normal Enables the normal 7-channel speakers and front
presence speakers (
☞
p. 16 ).
7ch + 1ZONE
Enables the normal 7-channel speakers and zone2 and
zone3 speakers (
☞
p. 18 ).
The Zone assigned to EXTRA SP1 can be selected
from Zone2 or Zone3.
7ch + 2ZONE Enables the normal 7-channel, Zone2 and Zone3
speakers (
☞
p. 19 ).
The Zone assigned to EXTRA SP1/EXTRA SP2 can
be selected from Zone2 or Zone3.
7ch + FRONT
Enables the normal 7-channel speakers and external
front speakers (
☞
p. 24 ).
7ch + FPR Enables the normal 7-channel speakers and external
presence speakers (
☞
p. 24 ).
7ch + FPR + 1ZONE
Enables the normal 7-channel speakers, external
presence speakers and zone speakers (
☞
p. 25 ).
The Zone assigned to EXTRA SP1 can be selected
from Zone2 or Zone3.
5ch BI-AMP Enables the bi-amp connection (
☞
p. 18 ).
5ch BI-AMP + FPR
Enables the bi-amp connection and external presence
speakers (
☞
p. 25 ).
5ch BI-AMP + SB Enables the bi-amp connection and external surround
back speakers (
☞
p. 25 ).
5ch BI-AMP + SB +
FPR
Enables the bi-amp connection, external surround
back and presence speakers (
☞
p. 26 ).
In the “Configuration,” you can select the speaker size
characteristic (Large or Small). Select the size (sound
reproduction capacity) that matches your speakers.
When speaker size is set to “Small,” low-frequency components
of the speakers that you configured are produced from the
subwoofer (or from the front speakers if there is no subwoofer).
Woofer diameter
• 6-1/4 in (16 cm) or larger
→
Large
• 6-1/4 in (16 cm) or smaller
→
Small
Large Select this for large speakers. The front speakers will
produce all of the front channel frequency
components.
Small
(Default) Select this for small speakers. The subwoofer will
produce front channel low-frequency components.
The crossover frequency can be selected from 40Hz,
60Hz, 80Hz (Default) , 90Hz, 100Hz, 110Hz, 120Hz,
160Hz, or 200Hz. All frequencies below the selected
frequency will be sent to the subwoofer.
Large
Select this when a large center speaker is connected.
Small
(Default) Select this when a small center speaker is connected.
The crossover frequency can be selected from 40Hz,
60Hz, 80Hz (Default) , 90Hz, 100Hz, 110Hz, 120Hz,
160Hz, or 200Hz when selecting this. All frequencies
below the selected frequency will be sent to the
subwoofer.
None
Select this when there is no center speaker. The front
speakers will produce center channel audio.
J
1 :
When “Subwoofer1” and “Subwoofer2” are set to “None,” you can only choose
“Large.” If the front speaker setting is “Small” and you change “Subwoofer1”
and “Subwoofer2” to “None,” it will automatically change to “Large.”