CONNECTIONS
Advanced speaker configuration
En
26
■
Using front speakers that support bi-amp
connection, surround back speakers and
front presence speakers
■
9.1-channel speaker layout
(Front speaker (Bi-amp) + 3 sp subwoofer
+ external surround back sp external front
presence speakers)
■
Connections of speakers
■
Assigning a speaker configuration
Connecting an external amplifier
The same channel signals are output from the jacks of the PRE
OUT and ZONE OUT terminals as from their corresponding
SPEAKERS terminals. When connecting an external power
amplifier (pre-main amplifier) to enhance speaker output, connect
the input terminals of the power amplifier to the PRE OUT and
ZONE OUT terminals of this unit.
When an external amplifier is used, front presence speakers and
surround back speakers can be used simultaneously with front
speakers that support bi-amp connection.
J
1
FRONT jacks
Front L/R speakers (bi-amp)
CENTER jack
Center speaker
SURROUND jacks
Surround L/R speakers
SURROUND BACK jacks
Front L/R speakers (bi-amp)
SUR.BACK (PRE OUT) jacks
External amplifier
(for surround back L/R speakers)
F.PRESENCE (PRE OUT) jacks
External amplifier
(for presence L/R speakers)
SUBWOOFER (PRE OUT) jack
J
2
Subwoofer
Power Amp Assign
5ch BI-AMP + SB + FPR
L
C
R
SL
SR
SW
EA
SBR
SBL
BI-AMP
BI-AMP
PR
PL
NOTES
•
When a component is connected to the PRE OUT and ZONE
OUT terminals, do not connect speakers to the SPEAKERS
terminals corresponding to those PRE OUT and ZONE OUT
terminals.
•
When an external amplifier equipped with a volume adjustment
function is connected, a sufficient volume level may not be
achieved.
Use of the following components is recommended.
–
An amplifier with no volume adjustment function.
–
An integrated amplifier equipped with a function that bypasses
volume circuitry, such as the Yamaha A-S2000 with MAIN IN
input.
a
ZONE2 jacks
Zone2 channel output jacks.
b
ZONE3 jacks
Zone3 channel output jacks.
c
FRONT/F.PRESENCE (PRE OUT) jacks
Front channel or front presence channel output jacks.
d
SURROUND (PRE OUT) jacks
Surround channel output jacks.
e
SUR. BACK (PRE OUT) jacks
Surround back output jacks. When you only connect one external
amplifier for the surround back channel, connect it to the SUR.
BACK (SINGLE) jack.
f
CENTER (PRE OUT) jack
Center channel output jack.
ZONE OUT
PRE OUT
ZONE 2
FRONT/
F. PRESENCE
SURROUND
SUR. BACK
CENTER
ZONE 3
(SINGLE)
SURROUND
SURROUND BACK/
SPEAKERS
CENTER
FRONT
BI-AMP
AV 4
BACK
SUBWOOFER
CENTER
PUT
MONITOR OUT/ZONE OUT
Y
P
B
P
R
D
(REAR)
(FRONT)
SUBWOOFER
(
)
(
)
1
1
2
IN
1
2
2
1
OUT
IN
OUT
REMOTE
+12V 0.1A MAX.
ZONE2/ZONE3/
F.PRESENCE
c d e
f
a b
J
1 :
An external amplifier equipped with four channels is required for this speaker
layout.
J
2 :
You can also use two subwoofers by connecting them to both SUBWOOFER1
(FRONT) and SUBWOOFER2 (REAR) jacks.