Yamaha RST90GTZ, Service Manual

Page: 14 / 504

GEN
INFO
1-2
IMPORTANT INFORMATION
PREPARATION FOR REMOVAL AND DISASSEMBLY
1. Remove all dirt, mud, dust, and foreign material before removal
and disassembly.
While cleaning, take care to protect the electrical parts, such as
relays, switches, motor, resistors, controllers, etc., from high
pressure water splashes.
2. Use proper tools and cleaning equipment.
Refer to “SPECIAL TOOLS”.
3. When disassembling the snowmobile, keep mated parts
together. This includes gears, cylinders, pistons, and other parts
that have been “mated” through normal wear. Mated parts must
be reused or replaced as an assembly.
4. During disassembly of the snowmobile, clean all parts and
place them in trays in the order of disassembly. This will speed
up assembly time and help ensure that all parts are reinstalled
correctly.
5. Keep all parts away from any source of fire.
6. Be sure to keep to the tightening torque specifications. When
tightening bolts, nuts, and screws, start with those that have
larger diameters, and proceed from the inside to the outside in a
crisscross pattern.
REPLACEMENT PARTS
Use only genuine Yamaha parts for all replacements. Use oil and
grease recommended by Yamaha for all lubrication jobs. Other
brands may be similar in function and appearance, but inferior in
quality.
IMPORTANT INFORMATION