![background image](http://html.mh-extra.com/html/yamaha/rs7000-ver-1-2/rs7000-ver-1-2_owners-manual_899785019.webp)
The Controls & Connectors
RS7000
19
T
[PAD 1] and [PAD 2]
Velocity-sensitive pads for performance data entry. Tapping
these pads enters the pre-specified note data at the speci-
fied pitch. The pitch for each pad can be set by playing the
appropriate key on the keyboard while holding the [TAP]
button and [PAD 1] or [PAD 2].
U
CARD Slot
Slot for memory card insertion.
The Rear Panel
1
POWER Switch
Press in to turn the RS7000 on, and press again to turn it
off.
2
AC INLET
The AC power cable supplied with the RS7000 is plugged
in here. Use only the supplied cable.
3
MIDI IN, OUT A, and OUT B Connectors
If you plan to use a MIDI keyboard or other instrument to
play and program the RS7000, it should be connected to
the MIDI IN connector.
The MIDI OUT A and B connectors can be connected to an
external tone generator or synthesizer if you want to trans-
mit performance data, button and knob operations, and pad
operations to external equipment from the RS7000.
4
SCSI Connector
External SCSI storage devices (hard disks, CD-ROM
drives, etc.) can be connected here. The connector is a 50-
pin half-pitch type.
5
FOOT SW Jack
An optional Yamaha FC4 or FC5 footswitch connected to
this jack can be used for start/stop, section selection, sus-
tain, or tap BPM entry.
6
CONTRAST Control
Use the CONTRAST control to achieve the best LCD dis-
play visibility (LCD visibility varies with viewing angle).
7
INPUT L and R Jacks
Analog mono or stereo signals can be connected here for
sampling (recording). Connect mono signals to either the L
or R jack.
8
OUTPUT L/MONO & R Jacks
These are the main stereo outputs from the RS7000. When
a plug is inserted into only the L/MONO output, the left- and
right-channels signals are mixed and delivered via that out-
put to allow direct connection to mono sound systems.
9
PHONES Jack
Any pair of stereo headphones with a 1/4” stereo phone
plug can be plugged in here for convenient monitoring. The
PHONES output level is adjusted via the MASTER VOL-
UME control.
POWER
MIDI
IN
SCSI
THIS CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003.
MUSICAL INSTRUMENT
US LISTED
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
ATTENTION
: RISQUE DE CHOC ÉLECTRIQUE NE PAS OUVRIR.
WARNING
379U
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE
FOLLWWING TWO CONDITIONS:
(1)THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE,AND
(2)THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECIVED,INCLUDING INTERFERENCE
THAT MAY CAUSE UNDESIRED OPERATION.
CET APPAREIL NUMÉRIQUE DE LA CLASSE B EST CONFORME À LA NORME NMB-003
DU CANADA.
FOOT SW
CONTRAST
R
R
INPUT
OUTPUT
L
L/MONO
PHONES
OUT A
OUT B
MODEL
SER. NO.
MADE IN JAPAN
ON /
AC INLET
OFF
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
1
2
3
4
5
6
7
8
9
Summary of Contents for RS7000 Ver.1.2
