![background image](http://html.mh-extra.com/html/yamaha/rs7000-ver-1-2/rs7000-ver-1-2_owners-manual_899785109.webp)
2
The P
attern Mode
10. Arpeggio & Assignable Knob Settings (Setup)
RS7000
109
1
INPUT GAIN
..........................................................[Knob 1]
[Settings] MIC, LINE
Matches the input gain of the INPUT L and R jacks to the
type of source used. The MIC setting produces input gain
high enough for direct microphone input, while the LINE set-
ting lowers the gain for optimum matching with line-level
sources.
This INPUT GAIN setting also applies to SAMPLING pro-
cedure (Page 229).
2
MONO/STEREO
...................................................[Knob 2]
[Settings] MONO
×
2, STEREO
Determines whether signals input via the INPUT L and R
jacks will be handled as separate mono signals (MONO
×
2),
or as a stereo pair (STEREO).
3
VOLUME 1
.............................................................[Knob 3]
[Settings] 0 ~ 127
Adjusts the volume of the input signal.
processed this parameters adjusts the volume of the INPUT L
signal, and when a stereo signal is being received it adjusts
the volume of the L and R inputs.
4
VOLUME 2.................................................
[Knob 4]
[Settings] 0 ~ 127
Adjusts the volume of the input signal.
When a mono signal is being processed this parameters
adjusts the volume of the INPUT R signal.
This parameter cannot be set when MONO/STEREO is set to
STEREO.
5
REVERB SEND 1/2
............................................[Knob 1]
[Settings] 0 ~ 127
Adjusts the level of the signal sent to the REVERB effect
stage.
6
DELAY SEND 1/2
................................................[Knob 2]
[Settings] 0 ~ 127
Adjusts the level of the signal sent to the DELAY/CHORUS
effect stage.
7
VARIATION SEND 1/2
..................................... [Knob 3]
[Settings] 0 ~ 127
Adjusts the level of the signal sent to the VARIATION effect
stage.
“0” produces the dry signal only, and “127” produces the
variation sound only.
8
PAN 1/2
.................................................................. [Knob 4]
[Settings] L63 ~ CENTER ~ R53
Adjusts the stereo pan position of the A/D input signal.
[PATTERN]
→
[SETUP]
×
3
This knob allows a range of parameters and tracks to be assigned
to the panel knobs.
The 4 LFO DEPTH and EG knobs can be independently set for
AMO, FILTER, and PITCH. Assignments can be made for up to
31 knobs.
1
KNOB SELECT
................................................... [Knob 1]
[Settings] 1 ~ 31
Specifies the knob to which a parameter or tracks will be
assigned.
2
PARAMETER (MIDI OUT)
............................... [Knob 2]
Specifies the parameter to be assigned to the knob selected
via KNOB SELECT, above.
Control numbers 001 ~ 119 (except 32), pitch bend, BPM, as
well as play effect and MIDI delay parameters can be
assigned.
3
TRACK
.................................................................... [Knob 4]
[Settings] AUTO, 01 ~ 16
Specifies the track to be controlled by the knob selected via
KNOB SELECT, above.
When set to AUTO, the selected track will be automatically
assigned to the knob.
When set to 01 ~ 16, the specified track is assigned to the
knob regardless of the currently selected track.
NOTE
When the MONO/STEREO parameter is set to
MONO
×
2, the [F1] and [F4] buttons can be
used to switch pages providing access to indi-
vidual REVERB SEND 1/2, DELAY SEND 1/2,
and VARIATION SEND 1/2, and PAN 1/2
parameters for each channel.
A/D settings for the INPUT L jack are provided
in A/D Setup page 2/3, and settings for the
INPUT R jack are provided in A/D Setup page
3/3.
[3] Knob Assign Page
3
1
2
[Knob 1]
[Knob 4]
[Knob 2]
Summary of Contents for RS7000 Ver.1.2
