Control functions
39
2.
Pull the lock pin and turn the special
tools to change the block position.
3.
Release the lock pin.
4.
Remove the special tools from the 2-up
adjusting block.
ESU11036
Adjusting the control rods
WARNING
EWS00771
The left and right adjusting nuts must be
set to the same position. Uneven settings
can cause poor handling and loss of sta-
bility.
The weight transfer can be adjusted by turn-
ing the adjusting nuts on the control rods.
1.
Loosen the locknut while holding the ad-
justing nut.
2.
To increase weight transfer, turn the ad-
justing nut in direction (a), and to de-
crease weight transfer, turn it in direction
(b).
WARNING! Never adjust the con-
trol rods beyond the maximum set-
ting, indicated by red paint; otherwise,
they could be damaged, which could
lead to an accident or injury.
[EWS00174]
1. 2-up position (rider and passenger)
2. Solo rider position
3. Special tool
4. Lock pin
1
2
3
4
1. Locknut
2. Control rod adjuster
1
2
(a)
(b)
U8JV72E0.book Page 39 Thursday, May 18, 2017 1:47 PM
Downloaded from
