INSTRUMENT AND CONTROL FUNCTIONS
3-12
3
EAU13780
Locking the steering with a
padlock
In addition to the main switch/steering
lock, there are brackets on the right
side of the steering head pipe for lock-
ing the steering with a padlock. To do
so, turn the handlebar until the holes in
the two brackets are aligned, and then
lock the steering with a suitable pad-
lock.
EAU35170
Rider seat
To remove the rider seat
Remove the bolts, and then pull the rid-
er seat up.
To install the rider seat
Insert the projection on the rear of the
rider seat into the seat holder as
shown, place the seat in the original po-
sition, and then tighten the bolts.
NOTE:
Make sure that the rider seat is properly
secured before riding.
1. Bolt
1. Projection
2. Seat holder
U1D611E0.book Page 12 Thursday, April 28, 2005 1:18 PM