Yamaha Royal Star Tour Deluxe XVZ13CTW 2006 Owner'S Manual Download Page 30

Page: 30 / 94

INSTRUMENT AND CONTROL FUNCTIONS

3-14

EAU35180

Helmet holder

A helmet holding cable is provided in
the left sidecase to secure a helmet to
the helmet holder.

To secure a helmet to the helmet
holder

1. To open the helmet holder, insert

the key into the helmet holder lock,
and then turn the key as shown.

2. Remove the helmet holding cable

from the left sidecase. (See page
3-16.)

3. Pass the helmet holding cable

through the buckle on the helmet
strap, and then hook the cable
loops over the helmet holder.

4. Place the helmet holder in the orig-

inal position, and then remove the
key.

WARNING

EWA11040

Never ride with a helmet attached to
a helmet holder, since the helmet
may hit objects, causing loss of con-
trol and possibly an accident.

To release the helmet from the hel-
met holder

1. Open the helmet holder, remove

the helmet holding cable from the
helmet holder and the helmet, and
then close the helmet holder.

2. Place the helmet holding cable in

the left sidecase.

1. Helmet holder

2. Unlock.

1. Helmet holding cable

2. Helmet

U2C422E0.book Page 14 Wednesday, July 12, 2006 9:16 AM

ProCarManuals.com

Summary of Contents for Royal Star Tour Deluxe XVZ13CTW 2006































































































Search results

Summary of Contents for Royal Star Tour Deluxe XVZ13CTW 2006

Reviews:

Related manuals for Royal Star Tour Deluxe XVZ13CTW 2006

Brands by name

Popular brands

Yamaha Royal Star Tour Deluxe XVZ13CTW 2006, Owner'S Manual

Search results

Summary of Contents for Royal Star Tour Deluxe XVZ13CTW 2006

Reviews:

Related manuals for Royal Star Tour Deluxe XVZ13CTW 2006

Brands by name

Popular brands