Yamaha Road Star XV1600A 2000, Owner'S Manual

Page: 58 / 103

PERIODIC MAINTENANCE AND MINOR REPAIR
6-10
6
3. Remove the engine oil filler cap
and drain bolts to drain the oil from
the crankcase and the oil tank.
NOTE:
@
Skip steps 4–6 if the oil filter cartridge is
not being replaced.
@
4. Remove the oil filter cartridge with
an oil filter wrench.
NOTE:
@
An oil filter wrench is available at a
Yamaha dealer.
@
5. Apply a thin coat of engine oil to
the O-ring of the new oil filter car-
tridge.
NOTE:
@
Make sure that the O-ring is properly
seated.
@
6. Install the new oil filter cartridge,
and then tighten it to the specified
torque with a torque wrench.
7. Install the engine oil drain bolts,
and then tighten them to the spec-
ified torques.
8. Pour only 2.5 L of the specified
amount of recommended engine
oil through the filler hole, insert the
dipstick, and then tighten the oil
filler cap.
9. Start the engine, rev it several
times, and then turn it off.
1. Engine oil drain bolt (oil tank) 1. Engine oil filter cartridge
Tightening torque:
Oil filter cartridge:
17 Nm (1.7 m·kg)
Tightening torques:
Engine oil drain bolt (crankcase):
43 Nm (4.3 m·kg)
Engine oil drain bolt (oil tank):
20 Nm (2.0 m·kg)
E_5ja.book Page 10 Thursday, August 24, 2000 8:53 AM
ProCarManuals.com