background image

CS-R5 Owner’s Manual

13

B

 UTILITY section

1

POWER Indicator

Lights when AC power to the unit is ON. If both 
power switches A and B are turned on, this indicator 
will light green. If either power switch A or B is 
turned on, it will light red. If the RIVAGE PM5 
system is not started, it will light orange.

2

USB port

Enables you to connect a USB device (such as a 
mouse, keyboard, or USB flash drive). Use a USB 
flash drive to store the system’s internal data and to 
load the stored data into the system.

■ Supported USB flash drive format

The FAT16 and FAT32 formats are supported.

■ Write Protection

Some USB flash drives feature write protection that 
prevents data from being erased inadvertently.
If your USB flash drive contains important data, we 
suggest that you use write protection to prevent 
accidental erasure.
On the other hand, you will need to make sure that 
your USB flash drive’s write-protect setting is turned 
off before you save data onto the USB flash drive.

For the latest information on which USB flash drives 
can be used with the system, visit the Yamaha Pro 
Audio global website at:
http://www.yamahaproaudio.com/

NOTICE

Do not remove the USB flash drive from the USB 
connector or turn off the power to the unit while the unit is 
accessing data, e.g., saving, loading or deleting data.

Doing so may damage your flash drive, or may damage the 
data in the unit or on your media device.

3

RECORDING port

Enables you to connect a USB flash drive to record 
and play back audio files. Supported file formats 
include WAV and MP3.
For the latest information on what USB flash drives 
can be used with the system, visit the Yamaha Pro 
Audio global website at:
http://www.yamahaproaudio.com/

4

[SYSTEM] key

Press this key to display information about the 
RIVAGE PM5 system on the touch screens.
Press and hold down the key for two seconds or 
longer to shut down the control section of the console 
(see page 23). Be sure to shut down before turning off 
the power switches.

5

TALKBACK [ON] key

Switches the Talkback function on or off.

6

TALKBACK [LEVEL] knob

Adjusts the Talkback input level.

7

MONITOR A/B [LEVEL] knobs

Adjust the output level of the monitoring signals.

2

4

5

7

1

3

6

Summary of Contents for RIVAGE PM5





































Reviews: