background image

Explanation of Graphical Symbols
Explication des symboles

The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated 
“dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

L’éclair avec une flèche à l’intérieur d’un triangle équilatéral est destiné à attirer l’attention de l’utilisateur sur la présence d’une 
« tension dangereuse » non isolée à l’intérieur de l’appareil, pouvant être suffisamment élevée pour constituer un risque d’électrocution.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance 
(servicing) instructions in the literature accompanying the product.

Le point d’exclamation à l’intérieur d’un triangle équilatéral est destiné à attirer l’attention de l’utilisateur sur la présence d’instructions 
importantes sur l’emploi ou la maintenance (réparation) de l’appareil dans la documentation fournie.

IMPORTANT SAFETY 
INSTRUCTIONS

1

Read these instructions.

2

Keep these instructions.

3

Heed all warnings.

4

Follow all instructions.

5

Do not use this apparatus near water.

6

Clean only with dry cloth.

7

Do not block any ventilation openings. Install in accordance with 
the manufacturer’s instructions.

8

Do not install near any heat sources such as radiators, heat 
registers, stoves, or other apparatus (including amplifiers) that 
produce heat.

9

Do not defeat the safety purpose of the polarized or grounding-
type plug. A polarized plug has two blades with one wider than the 
other. A grounding type plug has two blades and a third grounding 
prong. The wide blade or the third prong are provided for your 
safety. If the provided plug does not fit into your outlet, consult an 
electrician for replacement of the obsolete outlet.

10 Protect the power cord from being walked on or pinched 

particularly at plugs, convenience receptacles, and the point where 
they exit from the apparatus.

11 Only use attachments/accessories specified by the manufacturer.
12 Use only with the cart, stand, tripod, bracket, or 

table specified by the manufacturer, or sold with 
the apparatus. When a cart is used, use caution 
when moving the cart/apparatus combination to 
avoid injury from tip-over.

13 Unplug this apparatus during lightning storms or 

when unused for long periods of time.

14 Refer all servicing to qualified service personnel. Servicing is 

required when the apparatus has been damaged in any way, such 
as power-supply cord or plug is damaged, liquid has been spilled 
or objects have fallen into the apparatus, the apparatus has been 
exposed to rain or moisture, does not operate normally, or has 
been dropped.

(UL60065_03)

PRÉCAUTIONS CONCER-
NANT LA SÉCURITÉ

1

Lire ces instructions.

2

Conserver ces instructions.

3

Tenir compte de tous les avertissements.

4

Suivre toutes les instructions.

5

Ne pas utiliser ce produit à proximité d’eau.

6

Nettoyer uniquement avec un chiffon propre et sec.

7

Ne pas bloquer les orifices de ventilation. Installer l’appareil 
conformément aux instructions du fabricant.

8

Ne pas installer l’appareil à proximité d’une source de chaleur 
comme un radiateur, une bouche de chaleur, un poêle ou tout autre 
appareil (y compris un amplificateur) produisant de la chaleur.

9

Ne pas modifier le système de sécurité de la fiche polarisée ou de 
la fiche de terre. Une fiche polarisée dispose de deux broches dont 
une est plus large que l’autre. Une fiche de terre dispose de deux 
broches et d’une troisième pour le raccordement à la terre. Cette 
broche plus large ou cette troisième broche est destinée à assurer 
la sécurité de l’utilisateur. Si la fiche équipant l’appareil n’est pas 
compatible avec les prises de courant disponibles, faire remplacer 
les prises par un électricien.

10 Acheminer les cordons d’alimentation de sorte qu’ils ne soient pas 

piétinés ni coincés, en faisant tout spécialement attention aux 
fiches, prises de courant et au point de sortie de l’appareil.

11 Utiliser exclusivement les fixations et accessoires spécifiés par le 

fabricant.

12 Utiliser exclusivement le chariot, le stand, le 

trépied, le support ou la table recommandés par 
le fabricant ou vendus avec cet appareil. Si 
l’appareil est posé sur un chariot, déplacer le 
chariot avec précaution pour éviter tout risque 
de chute et de blessure.

13 Débrancher l’appareil en cas d’orage ou lorsqu’il 

doit rester hors service pendant une période prolongée.

14 Confier toute réparation à un personnel qualifié. Faire réparer 

l’appareil s’il a subi tout dommage, par exemple si la fiche ou le 
cordon d’alimentation est endommagé, si du liquide a coulé ou des 
objets sont tombés à l’intérieur de l’appareil, si l’appareil a été 
exposé à la pluie ou à de l’humidité, si l’appareil ne fonctionne pas 
normalement ou est tombé.

(UL60065_03)

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, 

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

ATTENTION : 

POUR RÉDUIRE LES RISQUES D'ÉLECTROCUTION, NE PAS RETIRER 

LE CAPOT (OU LE DOS). NE CONTIENT PAS DE PIÈCES NÉCESSITANT 

L'INTERVENTION DE L'UTILISATEUR. POUR TOUTE INTERVENTION, 

FAIRE APPEL À DES PROFESSIONNELS QUALIFIÉS.

ATTENTION

RISQUE DE CHOC 

ELECTRIQUE-NE PAS OUVRIR

The above warning is located on the rear of the unit.

L’avertissement ci-dessus est situé sur l’arrière de l’unité.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT 

EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.

AVERTISSEMENT

POUR RÉDUIRE LES RISQUES D’INCENDIE OU DE DÉCHARGE 

ÉLECTRIQUE, N’EXPOSEZ PAS CET APPAREIL À LA PLUIE OU À 

L’HUMIDITÉ.

CS-R5 Owner’s Manual

2

Summary of Contents for RIVAGE PM5





































Reviews: