Yamaha RIO1608-D, Service Manual

Page: 79 / 149

Rio1608-D
79
■
PROCEDURE TO WRITE THE SERIAL NUMBER
1. 1. Preparation
1-1. Required items
• Rio1608-D
• Ethernet (CAT5e) straight cable: 1 pc.
• PC: 1 unit, Windows XP with Ethernet port Windows
Vista or Windows 7
1-2. Network setting
Use the same network setting as for Test Program. (See p. 38)
1-3. Application
Download Rio1608-D Test Program Data Package from YSISS
website and copy it right under the C drive.
• ¥Rio1608-D¥tools¥serbar2¥serbar2.exe
1-4. Connection
Connect the PC and Primary port of Rio1608-D with Ethernet
(CAT5e) straight cable.
* Only the above connection is required. Do not connect
anything to other terminals.
PC
Rio1608-D
2. Updating procedure
2-1. Settings and starting of DIP switch
1) Set the DIP switch to the update mode.
No.8 on, others off
01
23
4
5
6
789AB
C
D
E
F
2) Turn on the power switch of Rio1608-D.
3) Check that all of +48V indicators fl ash, which means that
DIP switch has been activated in the update mode.
If all of +48V indicators do not flash, +48V LED
peripheral circuit may be faulty.
2-2. Starting the application program
When “serbar2.exe” is activated, the screen appears as shown
below.
2-3. Entering the serial number
Make sure that there is nothing written after “bar-code input:”.
* If there is, click on “clear”.
2-4. Starting to write the serial number
Using the keyboard, write “21” fi rst and then the serial number
of the main unit of Rio and click on “writing”.
2-5. End of entering the serial number
When writing the serial number is completed, “serial” appears,
followed by ”Writing of serial number was completed.”