Yamaha Revolabs FLX2 System Manual Download Page 40 | Manualshive

Page: 40 / 74

background image

40

Device Status

1. Browse to Device Status: Menu



Device Status.

2. The Device Status screen shows status for the

Microphones and the Speaker.

NOTE: The device status list is colorized. If a device is
charging or off, it will appear white. If a device is fully
charged or has more than 50% battery remaining, it will
appear green. Once the battery level of a device drops below
50% it will appear orange in the device status list. A critical
battery status will appear red. If a device has lost its link or is
no longer in range, it will appear yellow.

System Information

The following is a list of FLX Dialer menus that allow the user to retrieve system
information.

System Info

1. Browse to System Info: Menu



System Info.

2. About System shows the firmware (FW) bundle

version, the System Name, phone type
information, and the extension entered for this
phone.

3. Device Versions shows firmware version for the

Speaker (SPK) and Microphones (MICx).

4. System Versions shows the firmware versions for

the Application (APP), Baseband (BB), Bluetooth
Base (BTB), and Bluetooth Dialer (BTH) software.

5. Device IDs shows the ID of the Speaker (S1) and

the Microphones (Mx).

6. System ID shows the ID of the base.
7. Bluetooth Info shows information on the Bluetooth

link between the handset and the base, including
signal strength (‘Link Info’). Under ‘Bluetooth
Status’ it provides information about the Bluetooth
identifiers, and which Bluetooth profiles are
currently in use.

«
...
38
39
40
41
42
...
»

Summary of Contents for Revolabs FLX2











































































Reviews:

No comments

Related manuals for Revolabs FLX2

Brand: Neo Car Audio Pages: 19

Brand: Racal Instruments Pages: 64

Brand: Caliber Pages: 18

Brand: Parker Pages: 47

Brand: jWIN Pages: 13

DMU380SA Series

Brand: Memsic Pages: 105

Brand: SmartAccess Pages: 4

Brand: Work Pro Pages: 12

Brand: Madas Pages: 40

Brand: Trevi Pages: 46

ClickShare CX-20 Gen2

Brand: Barco Pages: 66

Brand: Balboa Water Group Pages: 20

Brand: Yealink Pages: 5

Brand: Aritech Pages: 18

Brand: Vicon Pages: 44

C7301U - Cd Rcvr W/ Custm Dsply

Brand: Panasonic Pages: 66

Brand: PROEL Pages: 28

Brand: Lexicomm Pages: 24

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands