manualshive.com logo in svg

Yamaha RAPTOR YFM660RP, Owner'S Manual, Page: 78 / 180

Share
Download
Yamaha RAPTOR YFM660RP Owner'S Manual Download Page 78

7-10

WARNING

_

Indicates a potential hazard that could
result in serious injury or death.

Do not operate at speeds too fast for your
skills or the conditions. 

Speed limiter 

For riders inexperienced with this model, this
model is equipped with a speed limiter in the
throttle lever housing. The speed limiter limits
the power and top speed of the ATV. Turning
the screw in decreases top speed, and turning
it out increases top speed.

1. Locknut

2. Adjusting screw

WARNING

POTENTIAL HAZARD 
Operating this ATV at speeds too fast
for your skills or the conditions. 
WHAT CAN HAPPEN 
Increases your chances of losing con-
trol of the ATV, which can result in an
accident. 
HOW TO AVOID THE HAZARD 
Always go at a speed that is proper for
the terrain, visibility and operating con-
ditions, and your experience.

Summary of Contents for RAPTOR YFM660RP





















































































































































































Reviews:

No comments