EBU08682
Engine oil
Engine oil level measurement
1.
Place the ATV on a level surface.
2.
Warm up the engine for several minutes
and stop it.
3.
Remove the dipstick and wipe it off with a
clean rag. Insert the dipstick in the filler
hole without screwing it in.
NOTE:
Wait a few minutes until the oil level settles
before checking.
4.
Remove the dipstick and inspect the oil
level.
5.
The oil level should be between the maxi-
mum and minimum marks. If the level is
low, add oil to raise it to the specified level.
c
C
Be sure no foreign material enters the
crankcase.
1. Dipstick
2. Maximum level mark
3. Minimum level mark
Engine oil replacement
1.
Place the ATV on a level surface.
2.
Warm up the engine for several minutes
and stop it.
3.
Place a container under the engine.
4.
Remove the dipstick and drain bolt to drain
the oil.
5.
Inspect the O-ring and replace if damaged.
1
2
3
8-5
5YF-10-3 4/24/03 9:00 PM Page 8-5
Summary of Contents for RAPTOR YFM50RT
