Yamaha RAPTOR YFM125RA, Service Manual, Page: 43 / 300

LUBRICATION POINTS AND LUBRICANT TYPES
2-20
EAS20360
LUBRICATION POINTS AND LUBRICANT TYPES
EAS20370
ENGINE
Lubrication point Lubricant
Oil seal lips
Bearings
Cylinder head bolt seats and washers
Camshaft sprocket cover O-ring
Tappet cover O-rings
Connecting rod big end thrust surface
Piston pin
Cylinder inner surface, piston ring grooves, and piston rings
Crankshaft end (clutch side)
Camshaft lobes
Valve stems, valve guides, and valve stem seals
Valve stem ends
Rocker arm shafts outer surface
Rocker arm inner surface
Timing mark accessing screw O-ring
Crankshaft end accessing screw O-ring
Engine oil filler cap O-ring
Starter clutch idle gear shaft inner surface
Starter clutch gear inner surface and boss
Starter clutch gear boss
Starter motor O-ring
Clutch push lever
Primary driven gear inner surface
Short clutch push rod
Long clutch push rod ends and ball
Main axle and pinion gears
Drive axle and wheel gears
Shift drum
Shift forks and shift fork guide bars
Crankcase mating surface
Yamaha bond
No.1215 (Three Bond
No.1215®)
Stator coil lead grommet
Yamaha bond
No.1215 (Three Bond
No.1215®)
Cylinder head bolt (M6) thread
Yamaha bond
No.1215 (Three Bond
No.1215®)
Neutral switch lead Three Bond 7738
LS
E
E
LS
LS
E
E
E
E
M
E
E
E
M
LS
LS
LS
E
E
E
LS
E
E
E
E
M
M
E
E