Yamaha RAPTOR 80 Owner'S Manual Download

Page: 108 / 134

8-32

stored as follows.

1. Disconnect the negative lead first and then the

positive lead.

2. Remove the battery, fully charge it, and then

place it in a cool, dry place.

CAUTION:

ECB00600

Do not leave or store the battery on its side.

3. If the battery will be stored for more than two

months, check the specific gravity of the elec-
trolyte at least once a month and fully charge

the battery whenever necessary.

To install the battery

NOTE:

Be sure the battery is fully charged.

1. Install the battery.
2. Connect the positive lead first, and then con-

nect the negative lead.

3. Make sure that the breather hose is properly

routed, in good condition, and not obstructed.

1. Battery
2. Negative battery lead (black)
3. Positive battery lead (red)

1. Battery
2. Battery breather hose

1
2

Summary of Contents for RAPTOR 80







































































































































Search results

Summary of Contents for RAPTOR 80

Reviews:

Related manuals for RAPTOR 80

Brands by name

Popular brands

Yamaha RAPTOR 80, Owner'S Manual

Search results

Summary of Contents for RAPTOR 80

Reviews:

Related manuals for RAPTOR 80

Brands by name

Popular brands