manualshive.com logo in svg

Yamaha RAPTOR 350, Owner'S Manual

Share
Download
Yamaha RAPTOR 350 Owner'S Manual Download Page 55

6-5

EBU01173

Shifting

This model has a 6-speed forward and
1-speed reverse transmission. The transmis-
sion allows you to control the amount of pow-
er you have available at a given speed or for
starting, accelerating, climbing hills, etc. To
shift into neutral, return the throttle lever to the
closed position, apply the clutch and repeat-
edly depress the shift pedal until it stops.
When it stops, it will be in first gear. Raise the
pedal slightly to neutral.

1. Shift pedal

N. Neutral position

WARNING

POTENTIAL HAZARD 
Improperly operating in reverse. 
WHAT CAN HAPPEN 
You could hit an obstacle or person be-
hind you, resulting in serious injury. 
HOW TO AVOID THE HAZARD 
When you shift into reverse, make sure
there are no obstacles or people behind
you. When it is safe to proceed, go slow-
ly. 

U5YT13.book  Page 5  Wednesday, June 29, 2005  10:35 AM

Summary of Contents for RAPTOR 350












































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands