Maintenance screen
Reference Manual
TF Series
- 80 -
Input Port Trim screen
Allows you to adjust the gain of each INPUT jack in 0.01 dB increments.
1
INPUT jack selection buttons
Select the INPUT jack that you want to configure here.
Select the button that corresponds to the INPUT jack you want to configure, and then
use the [TOUCH AND TURN] knob to adjust the value.
After making adjustments, start up the console as usual.
2
Reset All button
Resets all values to 0.00 dB. The factory default setting is also 0.00 dB.
Touch to display the confirmation message. Touch the OK button to perform the
operation.
Output Port Trim screen
Allows you to adjust the gain of each OMNI OUT jack in 0.01 dB increments.
1
OMNI OUT jack selection buttons
Select the OMNI OUT jack that you want to configure here.
Select the button that corresponds to the OMNI OUT jack you want to configure, and
then use the [TOUCH AND TURN] knob to adjust the value.
After making adjustments, start up the console as usual.
2
Reset All button
Resets all values to 0.00 dB. The factory default setting is also 0.00 dB.
Touch to display the confirmation message. Touch the OK button to perform the
operation.
NOTE
• When the reset is complete, you can continue to use other maintenance features without exiting.
ձ
ղ
NOTE
• When the reset is complete, you can continue to use other maintenance features without exiting.
ձ
ղ
