45
English
LEARNING NEW CONTROL FUNCTIONS (When the lid is open)
This is a learning remote control transmitter. The shaded keys in the illustration shown below can be programmed to “learn”
control functions from other remote control transmitters. By learning key-functions from other remote control transmitter, this unit can
then be used in place of one or more other remote control transmitters, thus making operation of your various audio and video
components more convenient.
Some of the “learning-capable” keys are originally empty and others have already been preset with functions to control this unit and
other Yamaha components. You can store new functions to them (in place of preset functions) as desired.
* See page 50 for the learning method.
* See page 52 for clearing a learned function (or all learned functions).
Note
If the memory capacity of the remote control transmitter becomes full, no further learning is possible even if some learning-capable
keys are not occupied with new functions. If, for example, you store Yamaha codes only into this remote control transmitter, up to
about 20 functions can be stored. Store new functions to the learnable-capable keys which are useful for you.
Keys which can have three functions (
1
,
2
,
3
,
4
)
In the “Learning-capable” keys, the keys numbered
1
–
4
in the
illustration at left can have three functions. This is because they
have three memory areas (A, B and C). (One function per area.)
You can store new functions into the area B and C, and use three
functions on a key by switching the memory areas with the A/B/C
switch. (Area A cannot learn a new function.)
To use these keys:
1.
Before using a key, select the area A, B or C of the key on which
the function you want to use is stored by using the A/B/C switch.
2.
Press the key.
The original factory settings of these keys are as follows.
A
Preset with
functions for
controlling a
Yamaha tape deck.
Preset with
functions for
controlling a
Yamaha CD player.
(STOP is empty.)
Preset with
functions for
controlling
the built-in tuner.
Preset as the DSP
program selector
keys (1–9, 0) and
the TEST key.
(+10 is empty.)
B
Empty
Empty
Empty
Preset as the DSP
program selector
keys (1–9, 0) and
the TEST key.
(+10 is empty.)
C
Empty
Preset with functions
for controlling a
Yamaha LD player
and DVD player.
(DISC is empty.)
Empty
Preset as the DSP
program selector
keys (1–9, 0) and
the TEST key.
(+10 is empty.)
1
2
3
4
The position of A/B/C switch
Note
The area A of all keys cannot learn new functions. To store new
functions to these keys, store them onto the area B or C.
Empty keys (
1
,
2
)
These are empty keys. Each key can learn a function from another
remote control transmitter.
For example, the TV key is useful for storing the function of your
TV’s power switch, and the VCR key can be used for your VCR’s
power switch.
TAPE
A
CD
TUNER
VCR
B
DVD/LD
V-AUX
PHONO
EFFECT
ON/OFF
TV/DBS
C
TRANSMIT
/LEARN
LEARN
CLEAR
MACRO
TIME/LEVEL
SET MENU
DELAY
CENTER
REAR
SWFR
SLEEP
MASTER VOLUME
TV
VCR
STANDBY
SYSTEM
POWER ON
MUTE
REMOTE CONTROL
TRANSMITTER
A/B
REC/PAUSE
B
A
DIR
DISC
STOP
PRESET
A/B/C/D/E
DIGITAL/
PRO LOGIC
ENHANCED
MOVIE
THEATER
1
2
3
SPORTS
STADIUM
DISCO
TV
4
5
6
ROCK
JAZZ CLUB CHURCH
7
8
9
HALL
TEST
0
+10
1
1
2
3
4
2
A/B/C switch
Lid is open.
*
1
: These buttons are used for learning a new function
or clearing a learned function (or all learned
functions). For details, refer to page 50 to 52 .
*
1
