Engli
sh
25
En
DAB (Digital Audio Broadcasting) uses digital signals for clearer sound and more stable reception compared to analog
signals. This unit can also receive DAB+ (an upgraded version of DAB) that allows for more stations using MPEG-4
audio codec (AAC+), which has a more efficient transmission method.
This unit supports Band III (174 to 240 MHz) only.
Before tuning in to DAB stations, an initial scan must be
performed. When you select the DAB for the first time,
the initial scan is performed automatically.
To listen to a DAB station, connect the antenna as
described in “Connecting the DAB/FM antennas (R-
S202D)” (see page 11).
1
Press TUNER to select the tuner as the input
source.
2
Press BAND to select the DAB band.
The initial scan starts. During the scan, the progress is
displayed on the front panel display.
When the scan is complete, the top of the list of the
scanned stations appears on the front panel display.
y
• If no DAB radio stations are found by an initial scan,
“NOT FOUND” will appear on the front panel display,
followed by “OFF AIR”. Press BAND twice to re-select
the DAB band and scan again.
• You can check reception strength of each DAB channel
label (see page 29).
• To perform an initial scan again after some DAB radio
stations are stored, select “INIT SCAN” (see page 30) in
the Option menu. If you perform an initial scan again, the
DAB radio stations currently registered to the preset
numbers will be cleared.
You can select a DAB radio station from the stations
stored by the initial scan.
1
Press TUNER to select the tuner as the input
source.
2
Press BAND to select the DAB band.
3
Press TUNING
jj
/
ii
to select a DAB radio
station.
“OFF AIR” appears when the selected DAB radio station is
currently not available.
LISTENING TO DAB RADIO (R-S202D)
Note
Preparing the DAB tuning
SLEEP
LINE 1
CD
TUNER
TUNING
MEMORY
BAND
LINE 2
LINE 3
TUNER
BAND
Selecting a DAB radio station for
reception
Note
SLEEP
LINE 1
CD
TUNER
TUNING
PRESET
MEMORY
INFO
BAND
LINE 2
LINE 3
TUNING
jj
/
ii
TUNER
BAND
