Error indications on the front display
61
En
English
ADDITIONAL
INF
O
RMA
T
IO
N
Error indications on the front display
Message
Possible cause
Remedy
Access denied
Access to the PC is denied.
Configure the sharing settings and select the unit as a device to
which music contents are shared (p. 34).
Access error
The unit cannot access the USB device.
Turn off the unit and reconnect your USB device. If the problem
persists, try another USB device.
The unit cannot access the iPod.
Turn off the iPod and turn it on again.
The connected iPod is not supported by
the unit.
Use an iPod supported by the unit (p. 62).
There is a problem with the signal path
from the network to the unit.
Make sure your router and modem are turned on.
Check the connection between the unit and your router (or hub)
(p. 14).
Check SP Wires
The speaker cables short circuit.
Twist the bare wires of the cables firmly and connect to the unit
and speakers properly.
No content
There are no playable files in the selected
folder.
Select a folder that contains files supported by the unit.
Please wait
The unit is preparing for connecting to the
network.
Wait until the message disappears. If the message stays more than
3 minutes, turn off the unit and turn it on again.
Unable to play
The unit cannot play back the songs stored
on the iPod for some reason.
Check the song data. If it cannot be played on the iPod itself, the
song data or storage area may be defective.
The unit cannot play back the songs stored
on the PC for some reason.
Check if the format of files you are trying to play is supported by
the unit. For information about the formats supported by the unit,
see “Playing back music stored on media servers (PCs/NAS)” (p.
34). If the unit supports the file format, but still cannot play back
any files, the network may be overloaded with heavy traffic.
Version error
Firmware update is failed.
Update the firmware again.
