Yamaha R-N800A User Manual Download Page 31

Page: 31 / 150

Making bi-wiring connections

Bi-wiring allows output to the speaker woofers (low frequency) and the tweeter/mid-range (mid to high-
frequency) to be split and driven separately. Speakers compatible with bi-wiring are required for these
connections.

Remove the short bar or bridge attached to the jacks of the speakers.

Connect the product and the speakers as illustrated.

The illustration shows connecting the left channel. Connect the right channel in the same way.

Swapping the connections between speaker jacks A and B is OK.

SPEAKERS

Rear panel

Speaker

NOTE

(

If the system is connected with bi-wiring, turn ON both Speakers A and B by pressing the SPEAKERS A and SPEAKERS B keys when
the power is ON.

(

Use speakers with an impedance of at least 4 Ω and that are compatible with bi-wiring connections.

Summary of Contents for R-N800A























































































































































Search results

Summary of Contents for R-N800A

Reviews:

Related manuals for R-N800A

Brands by name

Popular brands

Yamaha R-N800A, User Manual

Search results

Summary of Contents for R-N800A

Reviews:

Related manuals for R-N800A

Brands by name

Popular brands