background image

13

AUTOMATIC PRESET TUNING

You can also make use of an automatic preset tuning function for FM stations only. By this function, this unit performs automatic
tuning and stores FM stations with strong signals sequentially.  Up to 40 stations are stored automatically in the same way as in the
manual preset tuning method on page 12.

To store stations

1

2

Flashes.

Flashes.

After 5 seconds, the automatic preset tuning begins from A1.
Received stations are programmed to A1, A2 ... A8
sequentially.
* If more than 8 stations are received, they are also 

programmed to the preset station numbers on other pages 
(B, C, D and E) in that order.

If you want to store the first station received by the
automatic preset tuning to a desired preset station
number.

If, for example, you want to store the received first station to
C5, select “C5” by using the A/B/C/D/E button and the
PRESET STATIONS button soon after the display begins
flashing on/off in step 2.  After a few seconds, the automatic
preset tuning begins.  The received first station is stored to C5,
and next stations to C6, C7 ... sequentially.
If stations are stored up to E8, the automatic preset tuning is
finished automatically.

When the automatic preset tuning is finished

The display shows the frequency of the last preset station.
Check the contents and the number of preset stations by
following the procedure of the section “To recall a preset
station” on page 12.

To recall a preset station

Simply follow the procedure of the section “To recall a preset
station” on page 12.

Notes

You can replace a preset station by another FM or AM
station manually by simply following the procedure of the
section “To store stations” on page 12.

If the number of received stations is not enough to be stored
up to E8, the search is finished automatically when it
reaches the highest frequency after searching through all
frequencies.

With this function, only FM stations with sufficient signal
strength are stored automatically.  If the station you want to
program is week in signal strength, tune to it in monaural
manually and program it by following the procedure of the
section “To store stations” on page 12.

Press and
hold for about
3 seconds.

FM/AM

FM

MEMORY

MAN’L/AUTO FM

2

1

PRESET

MEMORY

AUTO TUNING

and

Summary of Contents for R-95




















Reviews: