I/O devices and external head amps
V5.1 Supplementary Manual
8
I/O DEVICE EDIT screen
This screen is displayed when you select the desired I/O device in the I/O DEVICE screen
(AMP page). You can remotely control the amplifier or the speakers.
For NEXO NXAMPmk2
1
STATUS indicator
Indicates the status of the device.
*
ALERT indicator display is green and red only. When an alert occurs, the indicator turns red and the alert
contents are displayed at the bottom of the screen.
2
SCENE
Displays the recalled scene number and title.
3
CABINET
Displays the name of NEXO Setup selected in the NXAMP.
4
VERSION
Displays the firmware version of the device.
5
INPUT METER
Displays both the input analog input levels and digital input levels.
6
STANDBY button
Switches the standby mode on or off.
7
OVERMUTE button
Switches the over mute (mute all channels) on or off.
8
Output level meter
Displays the output level of the channel.
9
VOLUME knob
Sets the channel volume.
0
LIMIT indicator
Lights while the limiter for amplifier or power supply protection is applied.
A
PROTECT indicator
Lights while the limiter for speaker protection is applied.
B
MUTE button
Switches the channel mute on or off.
C
Channel name
Displays the channel name (the speaker preset name for the NXAMP).
Status
Indicator display
OVERALL
Overall status of the device
Green: Normal
operation
Yellow: Fault
detection
Orange: Temporary malfunction
Red:
Malfunction that cannot
be resolved
ALERT
Alert
AMP
Operating status of each amplifier channel
PS
Operating status of power supply unit
FAN
Operating status of each FAN unit
9
C
A
:
6
7
1
8
2
B
5
3
4