Yamaha PZ50GTX, Owner'S Manual

Page: 36 / 92

Control functions
30
2. Turn the control rod adjusting nut in direc-
tion (a) to increase weight transfer or di-
rection (b) to decrease weight transfer.
WARNING
EWS00170
Never adjust the control rods beyond the
maximum range indicated on the rods with
red paint.
3. Tighten the locknut while holding the con-
trol rod adjusting nut in place.
CAUTION:
ECS00310
●
When using the two wrenches included
in the owner’s tool kit, make sure that
they are situated at a right angle to the
control rod as shown, and that they are
tightly fitted to the locknut and the con-
trol rod adjusting nut.
●
The left and right adjusting nuts must be
set to the same position. Uneven set-
tings can cause poor handling and loss
of stability.
1. Locknut
2. Control rod adjusting nut
1. Red paint area
2. Adjustable range
3. Standard position
Locknut tightening torque:
25 Nm (2.5 m·kgf, 18 ft·lb)
U8GK11E0.book Page 30 Wednesday, April 11, 2007 9:51 AM