manualshive.com logo in svg

Yamaha PW50(Z), Owner'S Manual

Share
Download
Yamaha PW50(Z) Owner'S Manual Download Page 29

 

INSTRUMENT AND CONTROL FUNCTIONS

 

4-6

 

2

3

4

5

6

7

8

9

 

EAU40701

 

Fuel cock 

 

The fuel cock supplies fuel from the
tank to the carburetor while filtering it al-
so.
The fuel cock has two positions:

 

S (stop)

 

With the lever in this position, fuel will
not flow. Always return the lever to this
position when the engine is not running.

 

O (on)

 

With the lever in this position, fuel flows
to the carburetor. Normal riding is done
with the lever in this position.

 

EAU13590

 

Starter (choke) lever “

” 

 

Starting a cold engine requires a richer
air-fuel mixture, which is supplied by
the starter (choke).
Move the lever in direction (a) to turn on
the starter (choke).
Move the lever in direction (b) to turn off
the starter (choke).

 

1. Arrow mark pointing to “S” (stop)

1

 

1. Arrow mark pointing to “O” (on)

1

 

1. Starter (choke) lever “

”

1

(a)

(b)

Summary of Contents for PW50(Z)







































































Reviews:

No comments

Brands by name

Popular brands

Load more brands