Perio
d
ic maintenance an
d
a
d
justment
7-9
7
4. Install the transmission oil drain
bolt and its new gasket, and then
tighten the bolt to the specified
torque.
5. Refill with the specified amount of
the recommended transmission
oil.
NOTICE
ECA10453
In or
d
er to prevent clutch slip-
pa
g
e (since the transmission oil
also lu
b
ricates the clutch),
d
o
not mix any chemical a
dd
itives.
Do not use oils with a
d
iesel
specification of “CD” or oils of a
hi
g
her quality than specifie
d
. In
a
dd
ition,
d
o not use oils la
b
ele
d
“ENERGY CONSERVING II” or
hi
g
her.
Make sure that no forei
g
n mate-
rial enters the transmission.
6. Check the O-ring for damage, and
replace it if necessary.
7. Install and tighten the transmis-
sion oil filler cap.
8. Start the engine, and then let it idle
for several minutes while checking
the transmission for oil leakage. If
oil is leaking, immediately turn the
engine off and check for the cau-
se.
Ti
g
htenin
g
torque:
Transmission oil drain bolt:
14 N·m (1.4 kgf·m, 10 lb·ft)
Recommen
d
e
d
transmission oil:
See page 9-1.
Oil chan
g
e quantity:
0.30 L (0.32 US qt, 0.26 Imp.qt)
1. O-ring
1
U2SA14E0.book Page 9 Monday, May 1, 2017 10:19 AM