20
PSR-SX900/SX700 Owner’s Manual
Starting Up
Connect the AC adaptor in the order shown in the illustration.
1
Turn down the [MASTER VOLUME] dial to “MIN.”
2
Press the [
] (Standby/On) switch to turn the power on.
After a brief interval, the Home display (page 26) appears. Adjust the volume as
desired while playing the keyboard.
3
After you finish using the instrument, turn off the power by
pressing and holding the [
] (Standby/On) switch for about a
second.
Power Supply
Use the specified AC adaptor (page 119) only. Using the wrong AC adaptor can result in damage to the instrument or overheating.
When setting up the product, make sure that the AC outlet you are using is easily accessible. If some trouble or malfunction occurs, immediately turn
the power off and disconnect the plug from the outlet.
Follow the order shown above in reverse when disconnecting the AC adaptor.
3
1
2
AC adaptor
DC IN jack
AC outlet
The shape of the plug and outlet differs depending on your area.
Power cord
WARNING
CAUTION
NOTE
Turning the Power On/Off
Until the Home display appears, no
operations can be carried out, including
power-off and keyboard performance.
NOTE
Even when the [
] (Standby/On)
switch is turned off, electricity is
still flowing to the product at the
minimum level. When you are not
using the product for a long time,
make sure to unplug the power
cord from the wall AC outlet.
When recording or editing, or
while a message is displayed,
the power cannot be turned off
even if you press the [
]
(Standby/On) switch. If you want
to turn off the power, press the
[
] (Standby/On) switch only
after recording, editing, or after
the message has disappeared. If
you need to force-quit the instru-
ment, hold down the [
]
(Standby/On) switch for longer
than three seconds. Note that the
force-quit operation might cause
data loss and damage to the
instrument.
CAUTION
NOTICE
2
Summary of Contents for PSR-SX900
Page 130: ...130 PSR SX900 SX700 Owner s Manual...
Page 135: ......
