PSR-SX600 Reference Manual
93
8
Mix
e
r
1
Press the [1
] (CMP) button to turn the Master Compressor on.
2
Press the [2
] (Type) button to call up the Master Compressor Type window.
3
Use the [1
]–[4
] buttons to select the Master Compressor Type, then press
the [ENTER] button.
Natural:
Natural Compressor settings in which the effect is moderately pronounced.
Rich:
Rich Compressor settings in which the instrument’s characteristics are optimally enhanced. This is
good for enhancing acoustic instruments, jazz music, etc.
Punchy:
Highly exaggerated Compressor settings. This is good for enhancing rock music.
Electronic:
Compressor settings in which the electronic dance music’s characteristics are optimally
enhanced.
Loud:
Powerful Compressor settings. This is good for enhancing energetic music such as rock or gospel
music.
User1–30:
Your own custom Compressor settings saved in step 5.
4
Edit the Master Compressor.
5
Press the [8
] (Save) button to save the settin
g
s as a User Master Compressor
type.
Select the destination to which the Master Compressor is to be saved, by using the [2
]–[5
]
buttons. If necessary, change the Master Compressor name. Press the [6
] (Rename) button to call up
the Character Entry window, enter the name, then press the [8
] (OK) button. The saved Master
Compressor setting can be called up using instruction steps 2 to 3 above.
[3
]
Compression
Determines the threshold (minimum level at which compression starts).
[4
]
Texture
Determines the ratio of compression (how much the dynamic range is com-
pressed).
[5
]/
[6
]
Output
Determines the output level.
