14
PSR-S950/S750 Owner’s Manual
Starting Up
1
Connect the power adaptor.
First connect one end of the AC cable to the power adaptor, then connect the power adaptor’s DC plug to the
instrument’s DC IN jack on the rear panel. Finally, connect the other end (normal AC plug) to the electrical
outlet.
2
Press the [
] (Standby/On) switch to turn the power on.
The main display appears.
3
While playing the keyboard, use the [MASTER VOLUME] dial to adjust the volume to an
appropriate level.
Turning the Power On and Playing the Keyboard
WARNING
Use the specified adaptor (page 100) only. The use of an incompatible adaptor may cause irreparable damage to the PSR-S950/S750, and
may even pose a serious shock hazard! ALWAYS UNPLUG THE AC POWER ADAPTOR FROM THE AC OUTLET WHEN THE PSR-S950/S750 IS
NOT IN USE.
1-1
1-3
Power adaptor
AC cable
1-2
DC plug
The shape of the plug and
outlet differs depending on
locale.
NOTE
Before the main display appears, turn-
ing the power off, operating the but-
tons and playing the keyboard cannot
be done.
NEXT PAGE
Summary of Contents for PSR-S950
Page 103: ...PSR S950 S750 Owner s Manual 103 Index...
Page 104: ......
Page 109: ...PSR S950 S750 Owner s Manual 109...
