PSR-S950/S750 Owner’s Manual
83
Mi
cr
op
hone – A
d
di
ng V
o
c
al
Har
m
on
y Ef
fect
s
to Y
our Si
ng
ing
–
8
5
(If necessary, turn on the microphone.) Adjust the [INPUT
VOLUME] knob while singing into the microphone.
Adjust the control while checking the SIGNAL lamp. Make sure to adjust the
control so the lamp lights in green. Make sure that the lamp does not light in
orange or red, since this indicates that the input level is too high.
6
At the bottom of the Main display, adjust the balance of the
microphone sound (MIC) with the instrument sound (page 53).
This section covers the Vocal Harmony Effects that can be applied to your voice via the microphone connected in
the previous instructions.
1
Press the [MIC SETTING/VOCAL HARMONY] button to call up
the Mic Setting/Vocal Harmony display.
2
Press the [D]/[E] (TYPE SELECT) buttons to call up the Vocal
Harmony Selection display.
3
Select a Vocal Harmony type by using the [A] – [J] buttons.
To call up the other display pages for further selections, press one of the [1
] –
[5
] buttons.
Make sure lamp does
not light in orange or
red.
Disconnecting the microphone
1. Set the [INPUT VOLUME] knob to the minimum position.
2. Disconnect the microphone from the [MIC/LINE IN] jack.
Applying the Vocal Harmony Effects to Your Voice
2
NEXT PAGE
Summary of Contents for PSR-S950
Page 103: ...PSR S950 S750 Owner s Manual 103 Index...
Page 104: ......
Page 109: ...PSR S950 S750 Owner s Manual 109...
