background image

26

 

PSR-S910/S710 Reference Manual

Styles – Pla

ying Rh

ythm and Accompaniment –

2

Step Recording

In the EDIT Page, you can record notes with absolutely precise timing. This Step Recording procedure is 
essentially the same as that for Song Recording (

page 45

) with the exception of the points listed below: 

• In the Song Creator, the End Mark position can be changed freely; in the Style Creator, it cannot be changed. 

This is because the length of the Style is automatically fixed, depending on the selected section. For example, 
if you create a Style based on a section of four measures length, the End Mark position is automatically set to 
the end of the fourth measure, and cannot be changed in the Step Recording display.

• Recording channels can be changed in the Song Creator 1-16 tab display; however, they cannot be changed 

in the Style Creator. Select the recording channel in the BASIC tab display.

• In the Style Creator, the channel data can be entered and System Exclusive data can be edited (delete, copy, 

or move). You can switch between the two by pressing the [F] button. However, Chord, Lyrics, and System 
Exclusive data cannot be entered.

For instructions on Step Recording, refer to 

pages 45–48

. For information on the EDIT display (Event List 

display), refer to 

page 58

.

Style Assembly

Style Assembly allows you to create a single Style by mixing the various patterns (channels) from existing 
internal Styles.

1

Select the desired Style to serve as the basis for recording/editing before calling up 
the Style Creator display.

2

Call up the operation display. 

[FUNCTION] 

 [F] DIGITAL REC MENU 

 [B] STYLE CREATOR 

 TAB [

E

][

F

] ASSEMBLY

3

Select the desired section (Intro, Main, Ending, etc.) for your new Style.

First call up the SECTION Selection display by pressing one of the Section buttons (INTRO, MAIN, 
ENDING, etc.) on the panel. Then change the section as desired by using the [6 

▲▼

]/[7 

▲▼

] buttons and 

actually enter the selection by pressing the [8 

] (OK) button.

NOTE

You cannot select INTRO 4 and ENDING 4 sections directly via the panel operation.

Summary of Contents for PSR-S710













































































































Reviews: