Yamaha PSR-E453, Owner'S Manual

Page: 44 / 80

Scale Tuning
PSR-E453/PSR-EW400 Owner’s Manual
44
Re
fe
re
n
c
e
Tuning Each Note to Create an
Original Scale
You can tune the individual notes in cents (a “cent” is
1/100th of a semitone) to create your original scale.
1
Press the [FUNCTION] button.
2
Use the CATEGORY [+] and [-] buttons to
call up “TuneNote” (Function 050).
After a few seconds, the current note appears.
3
Rotate the dial to select the note to be
tuned from C, C
#
, D, E
b
, E, F, F
#
, G, A
b
,
A, B
b
, B.
4
Press the CATEGORY [+] button to call
up “Tune” (Function 051).
After a few seconds, the tuning value of the note
selected in step 3 appears.
5
Rotate the dial to tune the note over a
range of -64 to +63.
The setting can be reset to the initial default value
by pressing the [+/YES] and [-/NO] buttons simul-
taneously.
6
Repeat steps 2–5 as desired.
7
Memorize the settings here to the Regis-
tration Memory as desired (page 35).
TuneNote
050
C
01 050
Current tuning note
Tune C
051
00
Tune
051
Tuning value
• When pressing the [+/YES] and [-/NO] buttons simulta-
neously after recalling an original scale memorized to
Registration Memory, the scale will return to the original
scale registered to Registration Memory, not to the
default tune value.
• When calling up “Scale” (Function 048) after using indi-
vidual note scale tuning, “(Edited)” will be shown in the
display. However, the edited scale settings will be
erased by calling up another scale. For this reason, the
edited settings should be memorized to the Registration
Memory.
NOTE