Voice Settings
Owner’s Manual
56
Re
fe
re
n
c
e
Selecting a Dual Voice
1
Press and hold the [DUAL] button for
longer than a second.
“D.VOICE” will appear in the display for a few
seconds, then the currently selected dual voice
will be displayed.
2
Select the desired Dual Voice by using
the dial.
Selecting a Split Voice
1
Press and hold the [SPLIT] button for
longer than a second.
“S.Voice” will appear in the display for a few sec-
onds, then the currently selected split voice will
be displayed.
2
Select the desired Split Voice by using
the dial.
Touch Response Sensitivity
When touch response is on you can adjust the key-
board’s sensitivity to dynamics in three steps.
1
Press the [TOUCH] button to turn touch
response on.
The [TOUCH] button alternately turns touch
response on and off.
The touch response icon will appear in the dis-
play when touch response is on.
When touch response is set to off, all notes will
be played at the same volume no matter how hard
or softly you play the keys.
2
Press and hold the [TOUCH] button for
longer than a second so that the Touch
Sensitivity item appears.
“TouchSns” will appear in the display for a few
seconds, and the currently selected touch sensitiv-
ity will be displayed.
3
Use the dial in response to keyboard
dynamics to select a touch sensitivity
setting between 1 and 3. Higher values
produce greater (easier) volume varia-
tion in response to keyboard dynam-
ics—i.e. greater sensitivity.
D.Voice
173
Marimba
The currently
selected dual voice
S.Voice
053
FngrBass
The currently selected
split voice
• The initial default touch sensitivity setting is “2”.
Touch response icon
TouchSns
2
Medium
Touch Sensitivity
Hold for longer
than a second.
NOTE