PSR-E360 Owner’s Manual
28
Re
fe
re
n
c
e
Recording Your Performance (Phrase Recording)
You can record your performance as a User Song (Song number 113), which can then be played back on the instrument. The
recorded User Song can be played back in the same way as the preset Songs.
1
Select the desired Voice.
Apply sustain (pages 16, 31) or effect (page 16) to the sound as desired
before starting recording.
2
Press the [PHRASE REC] button to enable the Record mode.
"UserSong" appears on the display.
To exit from the Record mode, press the [PHRASE REC] button again. (The
display stops flashing.)
3
Play the keyboard to start recording.
4
Press the [
>
/
] (Start/Stop) button to stop recording.
5
To play back the recorded Song, press the [
>
/
] button.
• A total of approximately 300 notes can be recorded to the User Song.
NOTE
• If the User Song is recorded, the data will be recorded over and erased (you will record
over and erase previous data in “User Song”).
UserSong
001
Flashes
NOTICE
• Never attempt to turn the power off or connect or disconnect the AC adaptor. Doing so
can result in a loss of data.
• When recording capacity becomes full during recording, a “Mem Full” message appears
on the display, recording is stopped, and the Song select display is shown.
• If you press the [
>
/
] button, even if you don’t play the keyboard, recording starts.
Limitations while recording:
• The following settings/operations cannot be recorded: Reverb Level, Style,
playback sound on the connected external audio device, metronome click,
Transpose, Tuning.
• The following settings and buttons are not available, or if operated, the new set-
tings cannot be recorded:
Split Point, Reverb Type, Chorus Type, [FUNCTION] button, [PORTABLE
GRAND] button.
• If you make a mistake or want to erase an existing Song, you can delete the User Song. To
do this, enable the Record mode in step 2, and then press the [
>
/
] button twice in suc-
cession (without playing the keyboard).
NOTICE
NOTE
NOTE
