Yamaha PSR-A3000, Owner'S Manual

Page: 26 / 224

26
PSR-A3000 Owner’s Manual
The File Selection display is for selecting Voice, Styles, and other data. The File Selection display appears when
you press one of the VOICE or STYLE category selection buttons, the SONG [SELECT] button, etc.
1 Location (drive) of data
• PRESET
..........Location where pre-programmed (preset) data is stored.
• USER ...............Location where recorded or edited data is saved. Installed
Expansion Voices or Styles are also saved here in the Expan-
sion folder.
• USB
.................Location where data on USB flash drive is saved. This
appears only when a USB flash drive is connected to the [USB
TO DEVICE] terminal.
2 Selectable data (files)
The files that can be selected on this display are shown. If more than 10 files
exist, the page numbers (P1, P2 ...) are shown below the files. Pressing the
corresponding button changes the display page. When other pages follow, the
“Next” button appears, and for the previous page, the “Prev.” button appears.
3
MENU 1/MENU 2
At the bottom of the File Selection display, you can toggle the indication
between MENU 1 and MENU 2 by pressing the [8

] button. Selecting
MENU 1 shows the function names related to the current file (Voice, Style,
Song, etc.) while selecting MENU 2 shows the function names of the file/
folder management (page 27).
File Selection Display Configuration
1
2
3
NOTE
Before using a USB flash drive, be sure
to read “Connecting USB Devices” on
page 95.
NOTE
By pressing the [USB] button, you can
also access Voices, Styles, and other
data files which are saved in the USB
flash drive (page 96).
NOTE
The data, both pre-programmed and
your own original, are saved as “files.”