manualshive.com logo in svg

Yamaha PRO HAULER YXP700, Owner'S Manual, Page: 20 / 92

Share
Download
Yamaha PRO HAULER YXP700 Owner'S Manual Download Page 20

3-2

●

Always go slowly and be extra careful when
operating on unfamiliar terrain. Always be
alert to changing terrain conditions when
driving the vehicle.

●

Never operate on excessively rough, slip-
pery, or loose terrain. 

●

Never turn at excessive speed. Practice
turning at slow speeds before attempting to
turn at faster speeds. Do not attempt turns
on steep slopes. 

●

Never operate the vehicle on slopes that
are too steep for it or for your abilities. Go
straight up and down slopes where possi-
ble. 

●

Never operate on slopes that are slippery
or ones where you will not be able to see
far enough ahead of you. Never go over the
top of a slope at speed if you cannot see
what is on the other side.

●

Always check terrain carefully before going
down slopes. Go as slowly as possible.
Never go down a slope at high speed. 

●

Always check for obstacles before operat-
ing in a new area.

●

Never operate the vehicle in fast flowing
water or water deeper than 15 cm (6 in).
Remember that wet brakes may have re-
duced stopping ability. Test your brakes af-
ter leaving water. If necessary, apply them
several times to let friction dry out the lin-
ings.

●

Always be sure there are no obstacles or
people behind you when you operate in re-
verse. When it is safe to proceed in re-
verse, go slowly. Do not brake abruptly
when carrying loads in the cargo bed.

●

Always use the size and type of tires spec-
ified in this manual.

●

Always maintain proper tire pressure as de-
scribed in this manual.

UJW410.book  Page 2  Monday, December 15, 2003  4:36 PM

Summary of Contents for PRO HAULER YXP700





























































































Reviews:

No comments