Setting Up
PSR-K1 Owner’s Manual
15
Turn on the power
Turn down the volume by turning the [MASTER VOLUME]
control to the left and press the [STANDBY/ON] switch to
turn on the power.
Pressing the switch again turns the power off.
Backup data in the SmartMedia card (page 84) is
loaded to the instrument when the power is turned on.
If no SmartMedia card is inserted or if no backup data
exists on teh card, all instrument settings are restored
to the initial factory defaults when the power is turned
on.
●
Music rest
• To disable automatic loading of SmartMedia card backup
data, simultaneously hold down the highest white key on
the keyboard (C6) and turn on the power. This allows you
start the instrument with the default settings yet still use
the SmartMedia card.
NOTE
• Even when the switch is in the “STANDBY” position, electric-
ity is still flowing to the instrument at the minimum level.
When you are not using the instrument for a long time, make
sure you unplug the AC power adaptor from the wall AC out-
let, and/or remove the batteries from the instrument.
• Never attempt to turn the power off when a “WRITING!” mes-
sage is shown in the display. Doing so can damage the
SmartMedia card and result in loss of data.
Insert the music rest into
the slots as shown.
Summary of Contents for Portatone PSR-K1
Page 1: ......
