84
PSR-K1 Owner’s Manual
Saving backup data to SmartMedia card
The panel settings of this instrument are reset to their original default settings every time
you turn power off and on again, which means your original settings are lost. However,
with a SmartMedia card, you can save your custom panel settings for recall by holding
down the [FUNCTION] button. The next time you turn the power on (with the proper
SmartMedia card inserted), all your custom settings are reloaded to the instrument.
Please keep in mind that turning the power on automatically will reset the panel settings
to the original default settings if no SmartMedia card or a SmartMedia card with no data
is inserted to the CARD slot.
■
Data which can be backed up
• Registration Memory
• FUNCTION display settings :
Tuning, Split Point, Touch Sensitivity, Accompaniment Volume,
Song Volume, Metronome Volume, Grade Setting, Demo Cancel,
Microphone Volume, Microphone Echo Volume, Language Switch
• Touch Response ON/OFF
• Data cannot be saved to a Smart-
Media card during song playback.
NOTE
• The setting data backed up to
the SmartMedia card is auto-
matically given the same file
name “PSR-K1.ENV”; saving
new data always overwrites and
deletes the previous data. This
also deletes the Registration
Memory data in the SmartMe-
dia card.
• Do not turn off the power when
a “WRITING!” message is
shown. Doing so may result in
loss of data on the SmartMedia
card.
Press and hold
Summary of Contents for Portatone PSR-K1
Page 1: ......
