68
,,,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,
QQQQQQQQQQQQQQQQQQ
QQQQQQQQQQQQQQQQQQ
¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢
¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢
■
SETUP COPY
...................................................................................................................................................................................
Copies all SETUP parameter settings (VOICE and FULL MIX-
ING CONSOLE ACMP PART settings, etc.) from the SOURCE
PART in the currently selected section to the specified DESTI-
NATION SECTION and PART.
The
SOURCE PART
LCD dials select
ALL
to copy from all
parts in the currently selected section to all corresponding parts
in the destination section, or
CURRENT
to copy from the
current record part in the currently selected section to the
specified destination section/part.
The
DESTINATION SECTION
LCD dials specify the sec-
tion to which the SETUP settings will be copied, and the
DESTINATION PART
LCD dials specify the part to which the
SETUP settings will be copied if the CURRENT source part is
selected.
Press the
EXECUTE
button.
• Copying may not be possible with some source and
destination combinations. In such a case the EX-
ECUTE LCD button will appear in gray and will not be
available.
EDIT
For all EDIT functions use the
PART
LCD dials to select the part (in the currently selected section) to be edited. The
part name for parts which are being used unedited from a preset style will appear in gray letters. “
*
” will appear for
parts which contain no data. Neither can be selected for editing. And when all parameters (if any) have been set up
as required, press the
EXECUTE
button to execute the corresponding edit operation. “Executing” will appear on the
display while the data is being processed. After processing the
EXECUTE
button changes to an
UNDO
button which
can be used to undo the operation if the results are not satisfactory. UNDO is only effective until the next operation
is performed.
■
QUANTIZE
...........................................................................................................................................................................................
The QUANTIZE function aligns recorded notes to the speci-
fied beats to “tighten up” the timing of a performance.
Use the
SIZE
LCD dials to select the beats to which the
notes will be aligned.
The
STRENGTH
dials determine how “strongly” the notes
will be quantized. If a value less than “100%” is selected, notes
will be moved toward the specified quantization beats only by
the specified amount.
The Custom Style Creator
1/4 note
1/4 note triplet
The quantize sizes are:
1/8 note
1/8 note triplet
1/16 note
1/16 note triplet
1/32 note
1/8 note +
1/8 note triplet
1/16 note +
1/8 note triplet
1/16 note +
1/16 note triplet
“Laid back” 1/8 note
“Laid back” 1/16 note