115
,,,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,
QQQQQQQQQQQQQQQQQQ
QQQQQQQQQQQQQQQQQQ
¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢
¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢
• If a measure is specified beyond the last measure which contains data,
the last measure which contains data will automatically be selected.
●
REPLACE
Use the
RECORD MODE
LCD dials to select REPLACE.
Use the
MEASURE SET
LCD dials to specify the measure
you want to start recording from.
C
Return to the main recording display and record.
..................................................................................
Press the
OK
LCD button to confirm the record mode
settings and return to the main
MULTI TRACK RECORD
display. Or press the
CANCEL
LCD button to return without
making any changes.
●
PUNCH IN
Use the
TRACK
LCD dials to select a track (or tracks) for
PUNCH IN recording. Press the [START/STOP] button to start
playback from the specified measure, then record at the punch-
in point according to the selected PUNCH IN TRIGGER mode
(set in the previous step).
When the PUNCH IN mode has been selected a
RE-
HEARSAL
LCD button will appear in the main
MULTI TRACK
RECORD
display. This can be turned “ON” to allow rehearsing
the punch-in without actually recording any data. Turn the
REHEARSAL function “OFF” when you’re ready to do the
actual recording.
●
REPLACE
Follow the normal recording procedure described in the
previous section. The only difference is that recording will
begin from the measure specified in the
REC MODE
display,
and all data from that point to the end of the song will be
replaced by the newly-recorded material.
V
Stop recording.
..............................................................................................................................................................................
If the FIRST KEY ON, FOOT SW 1, or FOOT SW 2 trigger mode was used, stop recording at the punch-out point
by pressing the panel [START/STOP] button or the footswitch if a FOOT SW mode was selected. If the AUTO SET
trigger was used, recording will stop automatically at the specified OUT measure.
• The record PUNCH IN or REPLACE mode remains active after recording, but the measure number reverts to 1.
when the first key is played on the keyboard. When FOOT SW 1 or FOOT SW 2 is selected recording will begin when
a footswitch connected to the corresponding rear-panel FOOT SWITCH jack is pressed. When AUTO SET is
selected, the punch-in and punch-out measures are specified by the
IN
and
OUT
LCD dials (i.e. recording begins
automatically at the IN measure and ends at the OUT measure).
Use the
MEASURE SET
dials to specify the first playback
measure. Be sure to give yourself a few measures “lead-in” prior
to the actual punch-in point.
• REPLACE or PUNCH IN recording cannot be used on
tracks to which rhythm and/or AUTO ACCOMPANI-
MENT data has been recorded. To re-record such
tracks the REC MODE must be set to REPLACE and
the MEASURE SET parameter must be set to “1” (this
is the normal MULTI TRACK RECORD mode).
Song Recording
