Yamaha PortaTone PSR-6000, Owner'S Manual

Page: 88 / 144

85
F2: Reverb/Effect
■
EFFECT TYPE & DEPTH
......................................................................................................................................................
●
EFFECT TYPE
Selects the effect to be applied when the [EF-
FECT] button is turned on (page 31).
If the
EFFECT TYPE
parameters are not show-
ing on the lower section of the display, press the
TYPE
LCD button. Use the
GROUP
LCD dials to
select an effect group, and the
TYPE
LCD dials to
select the desired effect.
The Effects
No. Group Type
1. Tremolo 1
2. Tremolo 2
3. Tremolo 3
4. Chorus 1
5. Chorus 2
6. Flange 1
7. Flange 2
8. Symphonic 1
9. Symphonic 2
NOTES
• Try out all of the effects to get a feel for what they can
do to your sound.
●
EFFECT DEPTH
Independently sets the depth of the selected
effect for the bass, chord 1, chord 2, orchestra 1, and
orchestra 2 sound.
If the
EFFECT DEPTH
parameters are not show-
ing on the lower section of the display, press the
DEPTH
LCD button. Use the
BASS
,
CHD2
,
CHD1
,
ORC2
, and
ORC1
LCD dials to set the depth of the
effect as required for the corresponding orchestra
parts.
NOTES
• Effect depth can be adjusted in 8 steps (0 … 7),
represented by a vertical bar to the right of each
parameter. The longer the bar, the greater the effect
depth.
• If the depth setting is changed while a note is being
played, the new depth setting will take effect from the
next note played.