Yamaha Portatone PSR-225 Owner'S Manual Download Page 25

Page: 25 / 120

DEMO START

Decreases Tempo
value

Increases Tempo
value

Change the value.

Use the O/- buttons to increase or decrease the Tempo value.
Holding down either button continuously increases or decreases the value.

Turn on the Metronome.

Press the METRONOME button.

To turn the Metronome off, press the METRONOME button again.

Setting the Metronome Time Signature

The time signature of the Metronome can be set to
various quarter-note based meters.

The time signature changes automatically when a style or
song is selected.

Simultaneously hold down the METRONOME
button and press the button on the numeric
keypad that corresponds to the desired time
signature (see chart at right).

Number

Time

button

signature

1/4 — Plays only “1” beats (all high clicks)

2/4

3/4

4/4

5/4

6/4

7/4

8/4

9/4

Plays no “1” beats (all low clicks)

PORTABLE GRAND

Indicates current beat
number

3 063

TEMPO

PORTABLE GRAND

METRONOME

3 063

TEMPO

3 063

TEMPO

The numeric keypad cannot
be used to change values
for the Overall menu
settings.

Summary of Contents for Portatone PSR-225

























































































































Search results

Summary of Contents for Portatone PSR-225

Reviews:

Related manuals for Portatone PSR-225

Brands by name

Popular brands

Yamaha Portatone PSR-225, Owner'S Manual

Search results

Summary of Contents for Portatone PSR-225

Reviews:

Related manuals for Portatone PSR-225

Brands by name

Popular brands