4/34
On MIXER SETUP screen (SYS/W.CLOCK function), select:
Whichever slots you choose here will be disabled from normal use.
So this connection method limits the amount of slot I/O you can practically use.
If the Cascade function is ENABLED, then the audio input to these slots will be merged with the PM5D
MIX buses (as specified on the CASCADE screen, in the SYS/W.CLOCK function).
On DME CONTROL screen (MIDI/REMOTE function), select:
CASCADE IN PORT (
1
)
CASCADE OUT PORT (
2
)
SLOT4
(will only allow 16 channels from DME)
SLOT3/4
SLOT3/4
SLOT1-4 [CH1-8]
(this is not normally a practical option)
SLOT1-4 [CH1-8]
SLOT1-4 [CH9-16]
(useful if you only have MY8 or MY4 cards installed)
SLOT1-4 [CH9-16]
INPUT PORT (
3
)
OUTPUT PORT (
4
)
CASCADE IN
CASCADE OUT
2
1
1
2
3
4
3
4
3
4
PM5D & DME64N CASCADE / Mode 1: Remote Control & Bi-directional Audio
■
Cascade Setup
DME64N Properties, Cascade Setting:
Choose 0dB Head Margin when connecting with PM5D in this
way.
Check all the ports you wish to use with PM5D.
NOTE:
DME Designer can stay on-line during PM5D control, but control will be faster if
DME Designer is off-line.
