Yamaha PLG150-DX Owner'S Manual Download Page 13

Page: 13 / 76

Operations /

Compare

This function lets you switch back and forth between the current edited condition of the

voice and its original un-edited condition. This allows you to easily hear and compare

the changes you make to a voice with its original condition.

Using Compare From the Edit Panel Window

Select the Edit mode.

Click the [EDIT/COMPARE] button.

Edit the voice as desired.

As soon as any parameter has been edited, a dot appears at the bottom right of the

voice number in the LED.

Select Compare.

Click the [EDIT/COMPARE] button. In the Compare condition, the voice number in

the LED flashes. Play the connected MIDI keyboard (or click the keys in the DX

Simulator window) to hear the original un-edited voice.

While Compare is active, the voice cannot be edited. (Moving the DATA ENTRY

slider has no effect.)

Click [EDIT/COMPARE] again to return to the edited condition.

Click the [EDIT/COMPARE] button as often as you wish to go back and forth

between the two conditions.

Compare

Summary of Contents for PLG150-DX













































































Search results

Summary of Contents for PLG150-DX

Reviews:

Related manuals for PLG150-DX

Brands by name

Popular brands

Yamaha PLG150-DX, Owner'S Manual

Search results

Summary of Contents for PLG150-DX

Reviews:

Related manuals for PLG150-DX

Brands by name

Popular brands