Yamaha PC412-D Owner'S Manual Download

Page: 26 / 101

5.6. USER EQ page

This page shows the EQ on/off status.

①

This shows the EQ on/off status.
Use the channel select keys to select the channel that you want to operate, and then press the main knob to

access the

USER EQ screen

If you select multiple channels, the channels will be linked for you to specify the EQ.

1. Use the channel select keys to select the channels that you want to link, and then press the main knob.

A screen for selecting the EQ copy-source appears.

2. Turn the main knob to select the copy-source channel, and then press the main knob.

The EQ setting screen appears in the channel-linked state.en

①

Channel

This shows the linked channel names. If all four channels are linked this indicates "ALL."

NOTE

• Link is defeated when you leave the EQ screen.

5. Panel operations

PC412-D PC412-DI PC406-D PC406-DI Owner’s Manual |

Summary of Contents for PC412-D






































































































Search results

Summary of Contents for PC412-D

Reviews:

Related manuals for PC412-D

Brands by name

Popular brands

Yamaha PC412-D, Owner'S Manual

Search results

Summary of Contents for PC412-D

Reviews:

Related manuals for PC412-D

Brands by name

Popular brands